Polyken 105C Multi-Purpose Double Coated Carpet Tape: 2 in. x 30 ft. (Natural)

Description

Product Highlights
Premium quality, double-sided tape on a cloth carrier that can be removed cleanly from most surfaces with no leftover residue. The residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition and convention halls. It's the perfect answer when you need short-term special event flooring and must leave a clean surface behind. The residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition
Note: Before applying this double-coated tape to a surface area, first test it in a small, inconspicuous area to ensure that it can be removed as desired. This tape is designed to not leave adhesive residue behind. However, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate's composition, it may still pull up loose debris or finish from the surface.
Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered). Polyken 105C carpet tape comes on a blue film liner for added visibility when used over a large area. For the same product on an easy to use paper release liner, try Polyken 105C-P - consider this for smaller jobs.
Adhesive: rubber. Carrier/Backing: cloth. Release Liner: low-density polyethylene (LDPE) film. Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner). Adhesion: 40 ounces per inch (to stainless steel test panel). Tensile Strength: 20 pounds per inch (longitudinal)
Service/Operating Temperature: 40°F to 200°F. Outdoor: Yes. Indoor: Yes. Moisture Resistant: Yes. Standards Met: Boeing BAC5034-4 Section 5.1.a(1)(a); can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED. Core: 3 inch diameter
For a premium quality, double-sided tape on a cloth carrier that can be removed cleanly from most surfaces with no leftover residue, choose
Polyken 105C Multi-Purpose Double-Coated Carpet Tape.
The residue-free easy removal feature makes the tape popular as a temporary flooring and carpet hold-down in exhibition and convention halls. It's the perfect answer when you need short-term special event flooring and must leave a clean surface behind.
Polyken 105C multi-purpose double-coated carpet tape, otherwise known as a double-sided gaffers tape, will give you as much as 40 ounces per inch of peel adhesion. This powerful tape can even be used as a lint roller for picking up microscopic residue and dirt. Polyken 105C carpet tape comes on a blue film liner for added visibility when used over a large area. For the same product on an easy to use paper release liner, try Polyken 105C-P - consider this for smaller jobs.
Polyken 105C Carpet Tape applications include carpet hold-down especially designed for conventions & exhibitions (event flooring); general-purpose uses in aircraft manufacture and construction; multipurpose use for general mounting and holding; and temporary holding applications for industrial use. Polyken 105C can also be used to hold a plastic drop cloth in place while painting.
Note:
This tape is designed to not leave adhesive residue behind. However, depending on certain conditions such as chemical cleaners used on the floor, length of time and the substrate's composition, it may still pull up loose debris or finish from the surface. We always recommend testing first on an inconspicuous area to ensure it removes as desired. Made in the U.S.
NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 48mm x 9m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information
- Core: 3 inch diameter
- Backing/Carrier: cloth
- Adhesive: rubber
- Release Liner: low-density polyethylene (LDPE) film
- Thickness: 13 mils (carrier, adhesive, liner) 11 mils (carrier, adhesive) 2 mils (liner)
- Adhesion: 40 ounces per inch (to stainless steel test panel)
- Tensile Strength: 20 pounds per inch (longitudinal)
- Service/Operating Temperature: 40F to 200F
- Outdoor: Yes
- Indoor: Yes
- Moisture Resistant: Yes