-40%
Patco 555 Archival Heavy-Duty Book Repair Tape: 1/2 in x 60 ft. (Clear)
$ 2.38
- Description
- Size Guide
Description
Product HighlightsPatco 555 is a heavy-duty acid-free overlaminating tape used for books, magazines, documents, graphics, signs, and placards.
The tape conforms around book spines for permanent protection. Coated with a special non-yellowing, acid-free adhesive. Also can be used as surface protection tape against moisture, UV, solvents, and abrasion,
Has excellent clarity with no yellowing or discoloration (UV stable).
Adhesion: 70 ounces per inch (to stainless steel test panel). Tensile Strength: 12 pounds per inch (longitudinal). Thickness: 5.5 mils (carrier, adhesive) 4.5 mils (carrier) .Elongation: 450%.
Adhesive: acrylic (acid-free). Carrier/Backing: low-density polyethylene (LDPE) film. Service/Operating Temperature: -40F to 200F. Application Temperature: 50F to 120F. Core: 3-inch diameter
Patco 555
is a heavy-duty acid-free overlaminating tape used for books, magazines, documents, graphics, signs and placards. The tape conforms around book spines for permanent protection. Coated with a special non-yellowing, acid-free adhesive. Also can be used as surface protection tape against moisture, UV, solvents and abrasion.
Features & Benefits
Conformable and performs well over a wide temperature range.
High adhesion over long periods.
Excellent clarity with no yellowing or discoloration (UV stable).
Super clear film for invisible protection.
Tough and abrasion resistant.
No edge bleed.
Made in the U.S. NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 60 ft. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first.
Technical Information
- Core: 3 inch diameter
- Backing/Carrier: low density polyethylene (LDPE) film
- Adhesive: acrylic (acid-free)
- Thickness: 5.5 mils (carrier, adhesive) 4.5 mils (carrier)
- Adhesion: 70 ounces per inch (to stainless steel test panel)
- Tensile Strength: 12 pounds per inch (longitudinal)
- Application Temperature: 50F to 120F
- Service/Operating Temperature: -40F to 200F
- Elongation: 450 %